TM55-2840-251-23
SECTION VIII GENERAL MAINTENANCE PROCEDURES (Continued)
1-73
INSTALLATION/REMOVAL OF ENGINE OR
POWER SECTION IN/FROM STANDS
(Cont)
5.
(Cont)
d.
With mount ring (6) in the horizontal
position on Stand (T. 51) (3), lower power section on to
stand, aligning C flange holes (21) with holes on mount
ring.
e.
Secure power section with 12 bolts (18) and
nuts (17). Torque nuts to 36 to 40 inch-pounds.
f.
Unhook hoist (1); remove capscrews (19)
and lifting eye (2).
GO TO NEXT PAGE
1-93
