TM55-2840-251-23
3-3 OUTER (LARGE) EXIT DUCT (AVIM) (Continued)
3-3-2 INSPECTION
1. Inspect for cracks, burning
or distortion. Evidence of
damage is cause for rejection of
exit duct.
2. No repairs permissible.
3-3-3 INSTALLATION
1. Install outer (large exit
duct (1) with offset hole (3)
approximately 20 degrees counter-
clockwise from offset hole (4)
in compressor bearing cover
flange.
2. Turn exit duct approximate-
ly 20 degrees clockwise to align
offset holes (3) and (4) and lock
exit duct in gas generator case
brackets.
3. Inspect.
FOLLOW ON MAINTENANCE:
Installation Inner (Small) Exit
Duct, Shroud and Vane Assembly
(Task 3-2-6)
END OF TASK
3-28
