TM55-2840-251-23
6-9
TEMPERATURE COMPENSATOR (Continued)
6-9-1 REMOVAL
1.
Remove tube assembly (1) coupling from coupling
(13).
NOTE
It is not necessary to disconnect
electrical harness or to remove electrical
connector from compensator bracket.
2.
Remove lockwire and disconnect air pressure tube
(4) from tube assembly (5).
3. Loosen four nuts (2) and bolts (3) securing rear
fireseal seals (9) and retaining plates (8).
4.
Remove two nuts and washers (6) securing
compensator bracket to flange G.
GO TO NEXT PAGE
6-42
