TM55-2840-251-23
6-9
TEMPERATURE COMPENSATOR (Continued)
6-9-1 REMOVAL (Cont)
CAUTION
Take special care to avoid damaging
bimetallic disk assembly when passing
through rear fireseal mount ring.
5.
Remove compensator bracket (11), complete with
compensator (7) and tube assembly (5).
6. If temperature compensator is to be replaced:
a. Disconnect tube assembly (5) coupling from
straight nipple (14). Remove tube assembly (5).
b. Remove two nuts (10) and compensator bracket
(11), complete with electrical harness.
NOTE
To avoid damage to harness, temporarily
secure compensator bracket to engine.
c. Remove tube coupling (13), plug (12) and straight
nipple (14). Discard preformed packings (15).
GO TO NEXT PAGE
6-42.1/(6-42.2 blank)