TM55-2840-251-23
10-3 PROPELLER REVERSING GEAR (Continued)
10-3-3 INSTALLATION (Cont)
44.
Assemble rod (12), locknuts (13) and rod ends
(14) to previously measured dimension. Insure threads
of rod ends pass safety holes in rod. Torque locknuts
(13) to 25 to 35 inch-pounds.
45.
Install bolt (11), washers (10), rod assembly (12)
and nuts (9). Torque nuts to 24 to 36 inch-pounds.
Install cotterpins (8).
46.
Assemble rod (5), locknuts (6) and rod ends (7) to
previously measured dimension insuring rod ends
threads pass safety holes in rod. Inspect.
47.
Torque locknuts (6) to 16 to 18 inch-pounds.
Lockwire (E. 5) nuts and rod ends.
48.
Install bolts (4), washers (3), rod assembly (5) and
nuts (2). Torque nuts to 24 to 36 inch-pounds. Install
cotterpins (1).
10-3-4 ADJUSTMENT
Refer to TM55-1510-215-23.
FOLLOW ON MAINTENANCE:
None
END OF TASK
10-21/(10-22 blank)