TM55-2840-251-23
10-3 PROPELLER REVERSING GEAR (Continued)
10-3-3 INSTALLATION (Cont)
19.
Connect clevis (67) to cam (87) in previously
noted position using pin (66), washer (65) and cotterpin
(64), then assemble rod (72), rod ends (74) and locknuts
(73) to previously recorded minimum, insuring threads
of rod ends pass safety hole in rod. Inspect. Torque
locknuts and rod ends to 16 to 18 inch-pounds and
lockwire (E. 5).
20.
Install bolts (71) (in previously noted positions),
rod (72), washers (70) and nuts (69). Torque nuts to 24
to 36 inch-pounds and install cotterpins (68).
GO TO NEXT PAGE
10-17