TM55-2840-251-23
10-3 PROPELLER REVERSING GEAR (Continued)
10-3-3 INSTALLATION (Cont)
35.
Install bearing (39) and retaining rings (38) in
lever (37).
36.
Assemble levers (36) and (37), bushings (34), bolt
(35), and nut (33). Torque nut to 24 to 36 inch-
pounds. Install cotterpin (32).
37.
Install assembly on prop governor with washers
(31) and nuts (30). Torque nuts to 24 to 36 inch-
pounds.
38.
Install washers (29) and guides (28). Torque
guides to 32 to 36 inch-pounds.
39.
Install locknut (20) and clevis (19) on terminal
(57). Insure threads of terminal pass safety hole in
clevis. Inspect. Torque locknut to 16 to 18 inch-
pounds. Lockwire (E. 5) clevis and locknuts.
40.
Install stud (18), clevis (19), washer (17) and nut
(16). Torque nut to 24 to 36 inch-pounds. Install
cotterpin.
41.
Install bracket (27), bolts (26), washers (40) and
nuts (25). Torque nuts to 32 to 36 inch-pounds.
42.
Install bushings (24) in lever (23).
43.
Install lever (23), bolt (22) and nut (21). Torque
nut to 32 to 36 inch-pounds.
GO TO NEXT PAGE
10-20
