TM55-2840-251-23
10-3 PROPELLER REVERSING GEAR (Continued)
10-3-3 INSTALLATION (Cont)
21.
Install adjuster (63). Align bolt hole with hole in
swivel (112).
22.
Install bolt (62). Torque to 32 to 36 inch-pounds
and lockwire (E. 5).
23.
Install springs (61).
24.
Install stop (60) and nut (59) on terminal (57).
25.
Install clamp (58).
26.
Install assembly on protruding end of wire rope
insuring wire rope passes safety hole in terminal.
27.
Install washer (56) and nut (55). Torque nut to 32
to 36 inch-pounds.
28.
Install stop (60) on adjuster (63), number of turns
previously noted.
29.
Torque to 32 to 36 inch-pounds and lockwire (E.
5) nut (59) and stop (60).
GO TO NEXT PAGE
10-18
