TM55-2840-251-23
10-4
AIR LINES AND FITTINGS (Continued)
10-4-5
INSTALLATION (Without P3 Filter) (Cont)
4.
Install gasket (12), elbow (10), sleeve (11), bolts
(9), bolts (8) and nuts (7). Torque nuts to 32 to 36 inch-
pounds and lockwire (E. 5) bolts.
5.
Install tube assemblies (5) and (6). Torque to 90
to 100 inch-pounds and lockwire (E. 5).
6.
Install temperature compensator (Task 6-9-3).
7.
Install tube assembly (4).
8.
Solder (E. 47) wire (3) to connector (16).
9.
Install clamp (2). Torque fingertight plus 5
degrees.
10.
Torque screws (1) to 32 to 36 inch-pounds.
GO TO NEXT PAGE
10-30
