TM55-2840-251-23
10-4
AIR LINES AND FITTINGS (Continued)
10-4-6
INSTALLATION (With P3 Filter) (Cont)
4.
Install gasket (27), elbow (25), sleeve (26), bolts
(24) and (25) and nuts (22). Torque nuts (22) to 32 to
36 inch-pounds. Lockwire (E. 5) bolts.
5.
Install tube assemblies (20) and (21). Torque
tube nuts to 90 to 100 inch-pounds and lockwire (E.
5).
6.
Install temperature compensator (Task 6-9-3).
7.
Lubricate packing (19).
8.
Install packing (19) and adapter (18). Torque .
adapter to 65 to 75 inch-pounds and lockwire (E. 5).
9.
Install elbow (15), locknut (14), retainer (17) and
packing (16). Torque locknut to 38 to 42 inch-pounds
and lockwire (E. 5).
10.
Install bolts (13), washers (10), spacers (12), filter
assembly (11) and nuts (9). Torque nuts to 32 to 36
inch-pounds.
11.Install tube assemblies (6) and (7). Torque tube nuts
to 90 to 100 inch-pounds and lockwire (E. 5).
12.Install electrical connector (8), bolts (3), washers (2),
nuts (1), bolts (5) and nuts (4). Torque to 32 to 36 inch-
pounds.
GO TO NEXT PAGE
10-32
