TM 55-2840-254-23
2-13 INSTALL COMPRESSOR BLEED BAND (Continued)
2-13
3. Slide bleed band (2) up and over compressor
housing (3) and through two retainers (4).
4. Continue sliding bleed band (2) around com-
presser housing (3). Guide it between fuel
control (5) and compressor housing (3).
5. Continue sliding bleed band (2) around com-
pressor housing (3). Install bleed band (2)
under and through two retainers (6) and into
position shown.
INSPECT
GO TO NEXT PAGE
2-49
