TM 55-2840-254-23
2-8 ADJUST INTERSTAGE AIR-BLEED ACTUATOR (WITHOUT WATER WASH KIT
2-8
P/N 2-200-071-54 INSTALLED) (Continued)
14. Note location of pin (16). Activate piston (13) to
closed position, and measure distance pin
(16) moves from open to closed. Pin shall
move at least 1.0 inch.
1 5.
a.
b.
Readjust interstage air-bleed actuator
(steps 8. thru 13.).
If clearance and minimum pin movement
cannot be obtained after readjustment
replace compressor bleed band
(Ref.
Tasks 2-9 and 2-13).
If you can not obtain clearance and minimum
pin movement, proceed as follows until re-
quirements are met:
GO TO NEXT PAGE
2 - 3
4
Change
5
