TM 55-2840-254-23
5-11
INSTALL ACCESSORY GEAR ASSEMBLY (AVIM) (Continued)
5-11
11. Install three handling tools (T18) (8). Tighten
handling tools (8) evenly until accessory gear
assembly (4) is free from housing (9).
In following step, be sure electrical cable
does not get caught as accessory gear as-
sembly is removed. Failure to comply
could cause damage to wiring which
would result in improper indication of
engine operation.
12. Remove accessory gear assembly (4).
GO TO NEXT PAGE
5-59
