NAVAIR 01-1A-505-3
TO 1-1A-14-3
TM 1-1500-323-24-3
014 03
1 September 2011
Page 7
c. Install insert into connector shell (WP 014 02).
d. Install backshell onto connector. Observe required torque per Figure 3.
e. Install compression clamp to secure shield to backshell in the indicated area in Figure 3 and Figure 9.
f. Tighten two screws to 14 in-lb.
Wiring
Harness EMI
Shield Braid
Connector
EMI Backshell
Banding
Figure 7. Banded EMI Backshell
Wiring
Harness EMI
Shield Braid
Compression
Nut
EMI Backshell
Figure 8. Compression Nut EMI Backshell