TM 1-4920-438-13&P
0025 00
POWER TRAIN SHOP
SINGLE CYLINDER BRACKET
INITIAL SETUP
Tools And Special Tools:
References:
Tool Kit, Power Plant
MIL-STD-2219
Welding Machine (3431-01-507-1712)
Equipment Conditions:
Spoolmatic (3431-01-024-1681)
Functional
Control (3431-01-429-9607)
Regulating Flow Meter (4820-01-086-4310)
Argon Bottle (8120-00-282-8077)
Materials/Parts:
Paint (WP 0037 00, Table 1, Item 3)
Primer (WP 0037 00, Table 1, Item 4)
Single Cylinder bracket Assembly
Hexagon Head Cap Screw
Angle Bracket (WP 0033 00, Figure 10, Item 3)
Flat Washer (WP 0033 00, Figure 10, Item 4)
Plain Hex Nut (WP 0033 00, Figure 10, Item 5)
Personnel Required: (1)
44E, Machinist
CMF 15 Series
NOTE
During installation of components the same hardware should be used so as to
maintain the original integrity of the shop sets.
INSPECT
Visually inspect single cylinder mod bracket assemblies for looseness or damage. If a bracket is loose, follow
procedures in WP 0026 00. If a bracket assembly is damaged it must be removed and repaired or replaced.
0025 00-3
