TM 1-4920-438-13&P
POWER TRAIN SHOP
DEGREASER BRACKET
INITIAL SETUP
Tools And Special Tools:
References:
Tool Kit, Power Plant
Equipment Conditions:
Torque Wrench 0-600 in. lbs. (5120-01-530-2311)
Functional
Materials/Parts:
Bracket (WP 0033 00, Figure 9, Item 1)
Hexagon Head Cap Screw
Flat Washer (WP 0033 00, Figure 9, Item 3
Lock Washer (WP 0033 00, Figure 9, Item 4
Plain Hex Nut (WP 0033 00, Figure 9, Item 5)
Personnel Required: (1)
44E, Machinist
CMF 15 Series
NOTE
During installation of components the same hardware should be used so as to
maintain the original integrity of the shop sets.
INSPECT
1. Inspect degreaser brackets for loose bolts or inserts. If there are any damaged bolts or threaded inserts,
replace as instructed in WP 0026 00.
2. Visually inspect degreaser brackets. If they are damaged beyond their usefulness, they must be removed and
replaced.
REMOVE
1. Remove bolt, lock washer, and flat washer attaching bracket to floor.
2. Remove bolt, lock washer, flat washers, and nut attaching bracket to degreaser leg.
3. Store hardware in cotton mailing bag.
0025 00-1
