TM 10-4930-351-14
0019 00
Table 1. Unit Preventive Maintenance Checks and Services (PMCS) for AAFARS (Continued)
Item
Not Fully Mission
No. Interval
Location
Procedure
Capable If:
Item to
Check/
Service
This engine is not enrolled in the Army Oil Analysis Program.
HARDTIME INTERVALS APPLY.
a.
Remove engine module from pump-engine module and
place engine module high enough to allow oil drain
pan to fit beneath oil drain plug.
b.
Remove either oil filler cap.
c.
Place oil drain pan beneath oil drain plug, remove the
drain plug and drain the oil. Dispose of in accordance
with local SOP.
d.
Remove the oil filter, taking care not to spill oil from
filter. Dispose of in accordance with local SOP.
e.
Install the oil drain plug.
f.
Lightly lubricate the seal on the oil filter.
CAUTION
Do not use oil filter wrench. Over-tightening may
damage the seal or allow the filter to seize.
g.
Install the oil filter hand tight.
h.
Add 1.9 qt (1.8 l) premium 15W-40 oil to the engine.
i.
Install the oil filler cap.
j.
Install the engine module in the pump-engine module.
k.
Start and run the engine for two or three minutes,
checking for oil leaks.
l.
Stop engine; wait 2-3 minutes.
m. Check the engine oil level. Add oil to a level between
MIN and MAX marks on dipstick.
13
300h/
Engine
Perform valve lash check and adjustment. Refer to WP 0043 00.
Valves are out of
adjustment.
6 mo
0019 00-3
