TM 10-4930-351-14
0020 00
1
INSTALLATION
CAUTION
Do not use tool for oil filter installation. Over-tightening may damage the seal or
allow the filter to seize.
1.
Install the oil filter (1) hand tight.
2.
Install the engine module in the pump-engine module. (WP 0007 00)
3.
Start and run the engine for two or three minutes, checking for oil leaks. Retighten the oil filter (1), if necessary.
4.
Stop engine.
5.
Check level of oil in crankcase. Top off as necessary with premium 15W40 motor oil.
END OF WORK PACKAGE
0020 00-2
