ADVANCED AVIATION FORWARD AREA REFUELING SYSTEM MODEL M100A1
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) PROCEDURES
Table 1 lists the checks and services required to keep your AAFARS in good operating condition. They are listed in
chronological order and should be performed in this order so they become a habit. An explanation of each column is
The "Item No." column provides the sequential identification number for each task.
The "Interval" column tells you when to do a certain check or service.
The "Location - Item to Check/Service" column tells you on which item the procedure is performed.
The "Procedure" column tells you how to do the required checks and services. Carefully follow these
instructions. If you do not have the required tools, or if the procedure tells you to, notify your supervisor.
The "Not Fully Mission Capable If" column tells you the conditions under which your AAFARS is not
capable of performing its intended mission.
Table 1. Unit Preventive Maintenance Checks and Services (PMCS) for AAFARS
Not Fully Mission
Inspect side, front, and door panels for holes.
Holes exist in any
Inspect all welds at corners and along the corner posts. Inspect all
Welds are damaged.
welds that attach the lockrod assemblies to the door assembly.
Inspect door handles and related hardware for any broken welds or Handles or related
defective parts. Operate handles.
hardware are broken
or if handles will not
Inspect for any large dents that may prevent the holder from being Document holder
completely opened or closed.
Inspect door seals for tears.
Door seals are torn.
Inspect for broken vents.
Vents are broken.