TM 10-4930-351-14
UNIT MAINTENANCE
ADVANCED AVIATION FORWARD AREA REFUELING SYSTEM MODEL M100A1
REPLACE ENGINE OIL FILTER
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Tool Kit, General Mechanics
Oil, Lubricating, Engine
(WP 0113 00, Item 1)
Drain Pan
Rags, Wiping (WP 0116 00, Item 21)
(WP 0113 00, Item 2)
Wrench, Strap
Equipment Condition:
(WP 0113 00, Item 2)
Engine module removed from pump-engine
module. (WP 0007 00)
REMOVAL
WARNING
Engine lubricating oil contains additives that may be harmful to personnel and the
environment. All leaks must be corrected as soon as possible. Wash oil from skin
immediately. Remove and wash contaminated clothing immediately. Spills of oil
must be cleaned up in accordance with local area direction to prevent harm to
personnel or damage to the environment.
Serious injury could occur if heavy equipment is moved/lifted without sufficient
personnel to do the job. Always use the number of soldiers called for by the
procedures to move or relocate the AAFARS equipment. Use proper physical lifting
procedures or use a suitable lifting device or dolly. Wear safety shoes, gloves and
other suitable protective clothing.
NOTE
This engine is not enrolled in the Army Oil Analysis Program. HARDTIME
INTERVALS APPLY.
1.
Using four persons or a hoist attached to the lifting eye on the engine, place engine module high enough to allow oil
drain pan to fit beneath oil filter (1).
2.
Place oil drain pan beneath oil filter (1). Remove the oil filter (1), taking care not to spill oil from filter. Dispose of in
accordance with local SOP.
0020 00-1
