TM 10-4930-351-14
0034 00
INSTALLATION
1.
Place key (9) in slot in fuel transfer pump (5) input shaft and install the flexible coupling (7) on the input shaft of the
fuel transfer pump (5). Install and tighten set screw (8). Ensure a gap of approximately 1/16 inch (1.6 mm) between
splined flexible coupling adapter (11) and shaft nut cover (12).
CAUTION
Installation of a fuel transfer pump includes alignment of the flexible coupling
adapters on the fuel transfer pump and the engine. Damage to the engine or fuel
transfer pump may result from misalignment.
2.
Position the fuel transfer pump (5) on the module sub-frame and mate the flexible coupling (7) on the pump with the
splined flexible coupling adapter (13) on the engine.
3.
With the pump fully coupled to the engine, install and tighten the four bolts (1), flat washers (2), lock washers (3) and
jam nuts (4) that secure the fuel transfer pump (5) to the module sub-frame.
4.
Clamp exhaust line (6) to engine.
5.
Install pumpage overtemperature sensor (WP 0022 00).
6.
Install pump inlet quick disconnect (WP 0025 00).
END OF WORK PACKAGE
0034 00-2
