TM 10-4930-351-14
UNIT MAINTENANCE
ADVANCED AVIATION FORWARD AREA REFUELING SYSTEM MODEL M100A1
REPLACE ENGINE MODULE PULLEY GUARD
INITIAL SET-UP:
Materials/Parts Required:
Tools:
None
None
REMOVAL
1.
If engine is installed in pump-engine module, unlatch and lower engine module latch bar.
2.
Remove the two quick disconnect pins (1) that secure the pulley guard (2) to the engine module frame (3).
3.
Unlatch the latches (4) that secure the pulley guard (2) to the engine module frame (3) and remove pulley guard (2).
INSTALLATION
1.
Position pulley guard (2) against engine module frame (3) and install the two quick disconnect pins (1) to secure the
pulley guard (2) to the engine module frame (3).
2.
Raise the pulley guard (2) and latch the pulley guard (2) to the engine module frame (3).
3.
Raise engine module latch bar and engage latches.
2
3
1
4
END OF WORK PACKAGE
0038 00-1/2 blank