TM 10-4930-351-14
UNIT MAINTENANCE
ADVANCED AVIATION FORWARD AREA REFUELING SYSTEM MODEL M100A1
REPLACE ENGINE MODULE CARRYING HANDLE
INITIAL SET-UP:
Materials/Parts Required:
Tools:
Tool Kit, General Mechanics
NOTE
This procedure applies to either carrying handle.
REMOVAL
1.
If engine is installed in pump-engine module, unlatch and lower engine module latch bar.
2.
Remove the four bolts (1), flat washers (2) and self-locking nuts (3) that secure the carrying handle (4) to the engine
module frame (5). Discard the self-locking nuts (3).
INSTALLATION
1.
Position the carrying handle (4) and install the four bolts (1), flat washers (2) and self-locking nuts (3) to secure the
carrying handle (4) to the engine module frame (5).
2.
Raise engine module latch bar and engage latches.
4
2
3
1
2
5
END OF WORK PACKAGE
0037 00-1/2 blank