TM 10-4930-351-14
UNIT MAINTENANCE
ADVANCED AVIATION FORWARD AREA REFUELING SYSTEM MODEL M100A1
REPLACE STARTER
INITIAL SET-UP:
Materials/Parts Required:
Tools:
Tool Kit, General Mechanics
Tags, Electrical (WP 0116 00, Item 29)
(WP 0113 00, Item 1)
REMOVAL
1.
Remove attaching hardware, and tag and remove electrical leads (1) from solenoid (2).
2.
Loosen the two cap screws (3 and 4) that secure the starter (5) to the engine block (6).
3.
Tag leads, and remove the lower cap screw (4), washer (7) and ground leads (8).
4.
Support the starter and remove the upper cap screw (3) and washer (9). Remove the starter.
INSTALLATION
1.
Position the starter (5) on the engine block (6) and loosely install the upper mounting cap screw (3) and washer (9).
2.
Install washer (7) and ground leads (8) on cap screw (4), and install in lower mounting hole. Remove tags.
3.
Tighten cap screws (3 and 4).
4.
Install electrical leads (1) to solenoid (2) as tagged. Remove tags.
3
1
9
5
6
2
4
7
8
END OF WORK PACKAGE
0041 00-1/2 blank
