TM 10-4930-351-14
UNIT MAINTENANCE
ADVANCED AVIATION FORWARD AREA REFUELING SYSTEM MODEL M100A1
REPLACE EXHAUST MANIFOLD
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Tool Kit, General Mechanics
REMOVAL
1.
Remove the four nuts (1), lock washers (2) and flat washers (3) from cylinder head studs (4). Discard lock washers.
2.
Remove exhaust manifold (5) and two gaskets (6). Discard gaskets (6).
3.
Clean remaining gasket material from cylinder head flange (7) and exhaust manifold (5) flange.
INSTALLATION
1.
Position gaskets (6) on cylinder heads (4).
2.
Place exhaust manifold (5) on cylinder heads (4).
3.
Install and hand tighten nuts (1), lock washers (2) and flat washers (3) that secure exhaust manifold (5). Tighten nuts (1)
alternately.
7
4
3
2
1
6
5
END OF WORK PACKAGE
0045 00-1/2 blank