TM 10-4930-351-14
UNIT MAINTENANCE
ADVANCED AVIATION FORWARD AREA REFUELING SYSTEM MODEL M100A1
REPLACE DECOMPRESSION ARM O-RING
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Tool Kit, General Mechanics
Petrolatum (WP 0116 00, Item 20)
(WP 0113 00, Item 1)
REMOVAL
1.
Remove screws (1) and nuts (2) from decompression lever (3). Remove decompression lever (3).
2.
Remove screw (4). Remove decompression arm (5).
3.
Remove O-ring (6) from decompression arm (5). Discard O-ring (6).
10
1
9
3
7
6
2
5
8
4
11
4
INSTALLATION
1.
Position spacer (7) flush on decompression arm (5) shaft.
2.
Lightly lubricate with petrolatum and install O-ring (6) on decompression arm (5).
3.
Mate small hole (8) in decompression arm (5) with tang (9) on spring (10) and slide decompression arm (5) into place in
cylinder head (11).
4.
Install screw (4) to attach decompression arm (5) to cylinder head (11).
5.
Use screws (1) and nuts (2) to install decompression lever (3).
END OF WORK PACKAGE
0047 00-1/2 blank
