TM 10-4930-351-14
UNIT MAINTENANCE
ADVANCED AVIATION FORWARD AREA REFUELING SYSTEM MODEL M100A1
REPLACE RELAY K1
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Screwdriver, Cross Tip, #2
Nut, Self-Locking (WP 0117 00, Item 89)
(WP 0113 00, Item 1)
Combination Wrench, 1/4"
(WP 0113 00, Item 1)
Combination Wrench, 3/16"
(WP 0113 00, Item 1)
REMOVAL
1.
Remove twenty-four screws (1) and flat washers (2) that secure the control panel (3) to the control box.
2.
Lift the control panel (3) from the control box and set on edge convenient to relay K1 (4).
3.
Remove the two self-locking nuts (5) and remove the K1 relay (4). Discard the self-locking nuts (5).
INSTALLATION
1.
Install relay K1 (4) in socket (6) with two self-locking nuts (5). (Relay is keyed to fit one way only.)
2.
Install control panel (3) in control box with twenty-four screws (1) and flat washers (2).
1
2
3
5
4
6
END OF WORK PACKAGE
0068 00-1/2 blank
