TM 10-4930-351-14
0085 00
INSTALLATION-Continued
14. Pull the seal (figure 7, 1) away from the bottom edge of door (2) allowing access to the inside edge of the seal.
NOTE
Installation of the carriers must be complete before polyurethane is allowed to dry.
15. Starting from about eight inches above the inside bottom edge of the door (figure 7, 2), apply a 1/8 inch bead of
polyurethane sealant (3) along the middle of the seal (1) facing the edge of the door. Continue the application to the
other side of the seal and up the edge for about another eight inches.
16. Install the sealant (figure 7, 3) around the bottom edge of the door (2).
8 INCHES
2
1
2
3
1
Figure 7. Right-Hand Door Seal Installation (Polyurethane Application)
17. Position the long carrier (figure 8, 1) along the outside edge of the right hand door (2).
18. Repeat Steps (4) through (7) for long carrier (figure 8, 1).
19. Position second long carrier along the inside edge of the right hand door.
20. Repeat Steps (4) through (7) for second long carrier.
0085 00-5
