TM 10-4930-351-14
0108 00
9.
Remove union bolt (24), washer (25), union (26), and spacer (27) connecting the oil return line to the oil cooler (9).
Discard washer. (25).
10. Remove the socket head cap screw (28) and washer (29) securing the oil cooler to gate (30). Remove oil cooler (9).
11. Remove oil supply line (31) at the crankcase.
12. Remove oil return line (32) at the crankcase.
13. Remove fuel shutoff solenoid wire from clip (33) if not already done.
14. Remove the two bolts (34) and washers (35) attaching gate (30). Remove gate, snaking fuel feed line from the fuel feed
pump through the gate.
15. Remove nut (36) and washer (37) attaching gate (38) to tie rod (39).
16. Remove tie rod (39) from between cylinders.
17. Remove nut (40) and washer (41) attaching lifting eye (42) to cylinder head.
12
11
10
13
14
16
6
15
7
40
8
41
38
42
37
12
36
13
12
30
9
35
34
13
23
4
3
33
1
22
21
2
20
27
5
32
39
26
25
24
29
28
31
17
19
18
19
Figure 4. Shroud, Cylinder Casing and Gates Removal
0108 00-6