TM 10-4930-351-14
0108 00
REMOVE STARTER (Refer to figure 5)
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Tool Kit, General Mechanics
Tags, Electrical (WP 0116 00, Item 29)
(WP 0113 00, Item 1)
Equipment Condition:
Pumping assembly shutdown
1.
Tag and remove electrical leads (1) from solenoid (2) if not already done.
2.
Loosen the two cap screws (3 and 4) that secure the starter (5) to the engine block (6).
3.
Tag leads, and remove the lower cap screw (4), washer (7) and ground leads (8) if not already done.
4.
Support the starter and remove the upper cap screw (3) and washer (9). Remove the starter.
3
1
9
5
6
2
4
7
8
Figure 5. Starter Removal
0108 00-7
