TM 10-4930-351-14
0108 00
REMOVE FUEL PUMP (Refer to figure 12.)
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Tool Kit, General Mechanics
None
(WP 0113 00, Item 1)
Equipment Condition:
Pumping assembly shut down
1.
If fuel feed line (1) has not been removed from fuel pump (2) disconnect fuel feed line (1) from fuel pump (2). Remove
union bolt (3), union (4) and two copper washers (5 and 6). Discard copper washers (5 and 6).
If fuel supply line (7) has not been removed from fuel pump (2) disconnect fuel supply line (7) from fuel pump (2).
2.
Remove union bolt (8), union (9) and two copper washers (10 and 11). Discard copper washers (10 and 11).
3.
Remove the two self-locking nuts (12) that attach the fuel pump to the block (13). Discard the self-locking nuts (12).
4.
Remove the fuel pump (2), drive rod (14) and gasket (15). Discard gasket.
13
15
14
2
8
11
9
10
3
6
4
12
5
7
1
Figure 12. Fuel Pump Removal
0108 00-16
