TM 10-4930-351-14
0108 00
Refer to figure 15.
NOTE
Removing the studs during engine overhaul is optional.
6.
Remove eight studs (1).
NOTE
Mark cylinder before removing to show which side faces injection pumps.
7.
Turn flywheel to TDC of each cylinder. Lift cylinder (2) from crankcase (3). Remove and discard cylinder gasket(s) (4).
Note quantity of gaskets (4) removed. The same quantity must be installed initially during assembly.
2
4
1
3
Figure 15. Cylinder Removal
0108 00-20