TM    55-2840-231-23 Table 1-10. Test Requirements - Continued Item 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 1-152 Parts   Replaced or Repaired Oil filter housing and associated   valves Spark igniter Ignition exciter Bleed valve Fuel  control Governor Fuel pump Compressor Compressor   case Combustion liner Combustion outer case Compressor discharge air tube(s) Double check valve Fuel filter element Oil filter element Fuel, oil, and air piping Change 11 . Functional Test Settings 3 thru 6 Settings 1 and 2 Settings 1 and 2 Settings 3 thru 6 Settings 1 thru 6 Settings 1 thru 6 Settings 1 thru 6 Settings 1 thru 10 Settings 1 thru 6 Settings 3 thru 6 Settings 3 thru 6 Settings 3 thru 6 Settings 3 thru 6 Settings 1 and 2 Settings 1 and 2 Settings 1 and 2 Remarks Adjust oil pressure regulating valve. (Refer to paragraph 8-6. ) Insure oil pressure is within limits of table 1-8. Insure  satisfactory  start. Insure  satisfactory  start. Insure  valve  operates  within  limits  of  figure 1-19 with a non-restricted fitting installed on Bleed  Valve  Compressor  discharge  part. Make fuel control adjustments as required. (Refer to paragraphs 6-5 thru 6-14. ) Insure engine operates within limits of table 1-8. Insure engine operates within limits of table 1-9. Insure engine operates within limits of table 1-9. Insure engine operates within limits of table 1-9. Insure engine operates within limits of table 1-9. Insure engine operates within limits of table 1-9. Insure engine operates within limits of table 1-9. Insure engine operates within limits of table 1-9. Check  for  leaks. Check  for  leaks. Check  for  leaks. Check  for  leaks.