TM 55-2840-231-23
2-6. Compressor - Installation - Continued
ENGINE/ - Continued
b. On the OH-58 heli-
copter, the lever shall
extend to the left (when
viewed from rear of
engine) and shall be
parallel to horizontal
centerline of engine.
9. Lever
10. Pressure Probe
Elbows (28 and 34)
Lockwire (item 7, Appendix D).
Prolonged contact with lubricating
oil (item 5, Appendix D) may cause
a skin rash. Those areas of skin and
clothing that come in contact with
lubricating oil should be thoroughly
washed immediately. Enclosed
areas where lubricating oil is used
should be adequately ventilated to
keep mist and fumes to a minimum.
Antiseize Compound (item 6, Appendix D).
Lubricating Oil (item 5, Appendix D).
When lever is properly
positioned, tighten
poppet guide to 65-
75 in. lb (0.7 -0.9 kg/m)
and secure with lock-
wire.
Apply antiseize com-
pound to threads of
pressure probe elbows
(28 and 34) and lubri-
cant to preformed
packings (23 and 37).
Screw pressure probe
elbows (28 and 34),
with backed-off jam
nut (22 and 36) and
preformed packings (23
and 37) into diffuser
scroll. Do not tighten
jam nuts (22 and 36)
at this time.
2 - 2
2
Change 6
