TM 55-2840-231-23
2-7.
Compressor - Preparation for Storage and Shipment - Continued
STORAGE AND
SHIPMENT/ -
Continued
2-28
e. Install cover (12) on
compressor bleed valve
flange.
f. Install shipping caps
and plugs at the follow-
ing locations. Tighten
threaded caps and
plugs fingertight.
g. Complete and attach
necessary tags to com-
pressor. Prepare neces-
sary forms and records
in accordance with para-
graph 1-39 and place in
a greaseproof envelope.
Prolonged contact with lubricating
oil (item 5, Appendix D) may cause
a skin rash. Those areas of skin and
clothing that come in contact with
lubricating oil should be thoroughly
washed immediately. Enclosed areas
where lubricating oil is used should be
adequately ventilated to keep mist and
fumes to a minimum.
Lubricating Oil (item 5, Appendix D).
b. Coat splines of adap-
ter spur gearshaft with
oil. Place cap (19) on
the adapter spur gear-
shaft and install cover
(20) on rear diffuser
pilot diameter.
c. Place plugs (17) in
compressor discharge
air tube bosses.
d. Install cover (24) on
compressor air inlet.
