TM55-2840-251-23
5-1 ACCESSORY GEARBOX (Continued)
5-1-1 INSPECTION
1. Using Gage (T.15)(1) set to 0.660 inch, insure that
gage
is
self-supporting
in
starter-generator
drive
gearshaft (2).
2. If gage is not self-supporting, repair (Task 5-3-2).
3. Inspect externally for:
- Burns
- Nicks
- Corrosion
- Damaged paint
- Deformed studs and
- Damaged helicoils
(Task 5-3-2).
FOLLOW ON MAINTENANCE:
Installation Starter-Generator
(TM55-1510-209-23)
END OF TASK
5-4
