TM55-2840-251-23
5-3 ACCESSORY GEARBOX (AVIM) (Continued)
5-3-1 REMOVAL (Cont)
7. Remove oil filter body (19), using Puller (T.29).
8. Remove packings (20), (21) and retainer (22).
9. Remove nut (31) and bolt (32).
10. Disconnect ignition harness (33) from ignition
regulator (34).
11. Cap receptacles and ignition harness connectors.
12. Remove plug (35) and packing (36).
CAUTION
Make certain that the washer in the
centerboss hole is in the 3 o clock
position so that ball (53) will not drop
out when accessory gearbox is removed.
13. Turn starter-generator gearshaft (37), until notched
washer (viewed through aperture created by removal of
plug (35)) is in 3 o'clock position.
GO TO NEXT PAGE
5-12
