TM55-2840-251-23
6-5
FUEL MANIFOLD ASSEMBLY (Continued)
6-5-2 INSTALLATION (Cont)
9.
Remove temporary bolts (3) from inlet manifold
adapter (5).
10. Secure each manifold adapter with locking plate (4)
and two bolts (3). Torque bolts (3) to 32 to 36 inch-
pounds. Do not lockwire at this stage.
NOTE
Bolts must be retorqued after engine test
and secured with lockwire (Chapter 1,
Section X).
11. Connect fuel delivery tube (20) to dump valve
elbow. Torque connection to 90 to 100 inch-pounds,
check torque locknut on dump valve elbow to 38 to 42
inch-pounds and lockwire (E.5) together.
12. Connect ignition harness to glow plug (Task 7-4-4).
13. Inspect.
FOLLOW ON MAINTENANCE:
None
END OF TASK
6-22.1/(6-22.2 blank)