TM55-2840-251-23
6-11 FUEL LINES AND FITTINGS (Continued)
6-11-1 REMOVAL
1. Remove lockwire and disconnect flexible fuel line
(11) from fuel pump and from oil-to-fuel heater.
2.
Remove lockwire and disconnect flexible fuel line
(3) from fuel pump and fuel control unit.
3. Remove lockwire and disconnect tube (1) from fuel
control unit and tube (8) at rear fireseal. Remove tube
(1).
4.
Remove lockwire and disconnect fuel tube (2) from
drain valve (10) and tube (8) at center fireseal. Remove
tube (2).
5. Remove nut (4), bolt (5) and clamp (9).
6.
Remove lockwire and two nuts (6) and washers (7)
from rear and center fireseals.
7.
Remove tube (8).
GO TO NEXT PAGE
6-50
