TM 55-2840-251-23
7-3 IGNITION REGULATOR (Continued)
7-3-5 INSTALLATION
1.
Install regulator (4), washers (3) and bolts (2).
Torque to 20 to 30 inch-pounds and lockwire (E.4) bolts.
2.
Install electron tubes (Task 7-2-4).
3.
Connect ignition harness (1). Torque finger tight plus
five degrees and lockwire (E.4) connections.
FOLLOW ON MAINTENANCE:
None
END OF TASK
7-14
