TM 55-2840-251-23
7-3 IGNITION REGULATOR (Continued)
7-3-4 REPAIR (Cont)
Electron Tube Socket
1.
Unsolder wiring from socket.
2.
Remove nuts (1), washers (2), screws (3) and socket
(4).
3.
Install replacement socket and secure with screws,
washers and nuts. Torque nuts to 4 to 6 inch-pounds.
4.
Connect wiring to socket using Solder (E.47).
5.
Install tube and functionally test (Task 7-3-3).
GO TO NEXT PAGE
7-13