TM 55-2840-254-23
2-8.1 ADJUST INTERSTAGE AIR-BLEED ACTUATOR (WITH WATER WASH KIT
2-8.1
P/N 2-200-071-54 INSTALLED) (Continued)
15. Note location of pin (1 9). Activate piston(15) to
closed position, and measure distance pin
(19) moves from open to closed. Pin shall
move at least 1.0 inch.
16. If you can not obtain clearance and minimum
pin movement, proceed as follows until re-
quirements are met
Readjust interstage air-bleed actuator
(steps 8. thru 13.).
If clearance and minimum pin movement
cannot be obtained after readjustment
replace compressor bleed band (Ref.
Tasks 2-9 and 2-1 3).
GO TO NEXT PAGE
Change 5
2-40.7