TM 55-2840-254-23
2-8.1 ADJUST INTERSTAGE AIR-BLEED ACTUATOR (WITH WATER WASH KIT
2-8.1
P/N 2-200-071-54 INSTALLED) (Continued)
7. Install tube cap (16) to tee (17).
8. Connect air pressure hose from air compressor
to tee (17). Apply 60 psig air pressure.
8.1. Visually check that there is no
piston (5) movement in the open position.
9. Activate piston (15) to closed position
by
placing fingers over two opening of tee (18).
GO TO NEXT PAGE
2-40.4
C h a n g e
5