TM 55-2840-254-23
2-9 REMOVE COMPRESSOR BLEED BAND (Continued)
2-9
The bleed band is very thin and bends
easily. Be careful not to kink or bend
it during handling. If kinked or bent,
bleed band must be replaced.
1. Pull lower end (1) of bleed band (2) until trail-
ing end (3) reaches first of five retainers (4).
2. Continue pulling bleed band
guide trailing end (3) through
2). Have helper
five retainers (4).
GO TO NEXT PAGE
2-42
