TM 55–2840–254–23
Change 6 5–67
5–11 INSTALL ACCESSORY GEAR ASSEMBLY (AVIM) (Continued)
5–11
NOTE
In following step, if pressure/ force is re-
quired to remove pinion gear (10), use me-
chanical puller (T3).
m. Remove nut (15), lockring (23), pinion gear
(10) and shim (24).
n.
Measure thickness of shim (24). Use out-
side micrometer caliper. Record thickness
of shim (24).
GO TO NEXT PAGE
