TM 55-2840-254-23
5-11 INSTALL ACCESSORY GEAR ASSEMBLY (AVIM) (Continued)
5-11
23. If not previously cleaned, clean com-
pressor rotor pinion gear (10) as follows:
a. Wear gloves (E20). Use lint-free cloth
(E26)
dampened in dry cleaning solvent (E17).
b. Wipe dry, using clean, dry lint-free cloth
(E26).
In following step, be sure electrical
cable does not get caught as accessory
gear assembly is installed. Failure to
comply could cause damage to wiring
which would result in improper indi-
cation of engine operation.
24. Position electrical cable (3) through accessory
gear assembly (4), and install accessory gear
assembly (4). Use one bolt (6) to temporarily
hold accessory gear assembly (4).
GO TO NEXT PAGE
5-71
