TM 55–2840–254–23
5–70 Change 6
5–11 INSTALL ACCESSORY GEAR ASSEMBLY (AVIM) (Continued)
5–11
NOTE
Depending on the accessory gear assembly
being installed, a hole (26) is not provided
for the o–ring and an o–ring (25) is not re-
quired in the assembly.
19. Install new packing (25) in hole (26) on acces-
sory gear assembly (4).
20. Install new packing (27) on groove (28).
21. Install new packing (29) on groove (30).
22. Clean accessory inner bevel gear teeth (1) as
follows:
a.
Wear gloves (E20). Use lint–free cloth
(E26) dampened in dry cleaning solvent
(E17).
b.
Wipe dry, using clean, dry lint–free cloth
(E26).
GO TO NEXT PAGE
