TM
l-1500-328-23
a. Removed components meeting the following standards will be
classified as serviceable and tagged with a DD Form 1574 (Serviceable
Materiel):
Tag
(1) TC components assigned a TBO interval of 500 hours or more
and have 25 percent or more of the interval remaining.
(2) TC components assigned a TBO interval of less than 500 hours
and have 100 hours or more of the interval remaining.
(3) RC components with 100 or more hours of the assigned MAOT
remaining.
b. Removed components meeting the following standards will be
classified as unserviceable:
(1) TC components assigned a TBO interval of 500 hours or more
and have less than 25 percent of the established interval remaining
will be tagged with a DD Form 1577-2 (Unserviceable (Reparable) Tag
Materiel). The following statement will be recorded on the tag
"Returned for overhaul IAW TM l-1500-328-23."
(2) RC components with less than 100 hours of the assigned MAOT
remaining will be tagged with a DD Form 1577 (Unserviceable
(Condemned) Tag). The following statement will be recorded on the
"Condemned IAW TM l-1500-328-23." Mutilation per Section IX, this
manual, will be accomplished before turn-in to the local property
disposal office.
(3) TC components assigned a TBO interval of less than 500 hours
and have less than 100 hours of the interval remaining will be tagged
with a DD Form 1577-2 (Unserviceable (Reparable) Tag
Materiel).
The following statement will be recorded on the tag "Returned for
overhaul IAW TM l-1500-328-23."
Unserviceable expendable RC components/parts; such as, hardware
nuts, etc.) cables and rod end bearings, will be discarded
after compliance with the mutilation requirements in Section IX of
this manual.
d. CC components will be subject to the necessary inspections
and/or tests to determine their state of serviceability. The
component will be appropriately tagged per DA Pamphlet 738-751 and
turned-in to the local supply activity.
Used serviceable parts may be
Reuse of Serviceable Parts.
installed on other aircraft providing the item has been proven
serviceable by a thorough inspection and/or functional test before
installation or during a repair/overhaul process. All documentation
will be prepared and submitted per DA Pamphlet 738-751.
4-6
