TM 1-1510-254-CL
4. BLEED AIR VALVES -- ENVIR OFF
(below 10,000 feet).
5. CABIN PRESS switch -- DUMP.
Prior to removing emergency exit hatch,
slow to a safe airspeed (approximately
160 KIAS or below), and ensure passen-
gers are seated with seat belts fastened
and all loose equipment secured.
6. Emergency exit hatch -- Remove and
stow.
7. Seat belts and harnesses -- Fasten.
8. Landing Gear Alternate Extension Lever
-- Stow.
9. LDG GEAR CONTROL -- UP.
10. LANDING GEAR RELAY circuit breaker
-- Pull.
11. LANDING GEAR WARN horn circuit
breaker -- Pull.
12. EGPWS circuit breaker -- Pull.
13. Nonessential electrical equipment -- Off.
14. FLAPS -- As required (DOWN is
recommended for landing).
JUST PRIOR TO TOUCHDOWN:
15. POWER levers -- IDLE when landing
on desired touchdown area is assured.
17. CONDITION levers -- FUEL CUTOFF.
18. Fuel FIREWALL SHUTOFF VALVES --
CLOSED.
19. MASTER SWITCH -- OFF.
E-19