TM 1-1510-254-CL
LANDING WITH ONE MAIN GEAR
UNSAFE
1. Retract gear and make a GEAR UP
LANDING.
IF THE GEAR WILL NOT RETRACT:
2. Fuel load -- Reduce.
3. Crew and passenger brieings --
Complete.
4. Loose equipment -- Stow/secure.
5. BLEED AIR VALVES -- ENVIR OFF
(below 10,000 feet).
6. CABIN PRES switch -- DUMP (after
cabin has depressurized).
7. Emergency exit hatch -- Remove and
secure.
8. Seat belts and harnesses -- Fasten.
9. Extension handle -- Stow.
10. LDG GEAR CONTROL -- DN.
11. LANDING GEAR RELAY circuit breaker
-- Pull.
12. LANDING GEAR WARN horn circuit
breaker -- Pull.
13. Nonessential electrical equipment --
OFF.
14. Before landing checklist -- Complete.
15. FLAPS -- As required.
16. Airspeed -- Normal approach speed.
17. POWER levers -- IDLE when landing
on desired touchdown area is assured.
18. CONDITION levers -- FUEL CUTOFF.
E-21
